Gasoline & Diesel lubricant for Euro IV engines
100% Synthetic
TYPE OF USE
Lubricant specially designed for last generation cars, powered by
turbo Diesel direct injection or gasoline engines, EURO IV emission
regulation compliant, requiring an ACEA C3 engine oil, high HTHS (>
3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of suphated ash
(= 0.8%),phosphorus (0.07 = x = 0.09%) and sulphur (= 0.3%). Suitable
for any type of Diesel or gasoline engines calling for ACEA A3/B3 or
A3/B4 lubricants.
ATTENTION : For BMW vehicles, this product can be used for gasoline
engines only in EuropeanUnion countries, Switzerland, Norway and
Liechtenstein. Refer to BMW recommendation. Do not use for engines from
VW group fitted with DPF when VW 507 00 is required.
PERFORMANCES
STANDARDS ACEAA3 / B4 / C3
APPROVALS
API SM / CF
CAR RECOMMENDATIONS Nissan – Fiat – Kia/Hyundai –
Suzuki – Ssangyong… Engines compliant with EURO IV emission regulation
are fitted with sensitive exhaust gas aftertreatment systems :
- Sulphur and Phosphorus inhibit catalytic convertors operation and
can damage catalyticcomponents : inefficient exhaust gas treatment.
- Sulfated Ashes clog diesel particulate filters : shorten regenerating cycle, higher fuel consumption and engine power loss.
ACEA developed ACEA C3 standard for lubricants with high HTHS (>
3.5 mPa.s), reduced SulphatedAsh, Phosphorus and Sulphur content (Mid
SAPS), suitable for use with exhaust gas after treatment systems. ACEA
C3 lubricants achieve extended drain intervals managed by vehicles
computer on board.
RECOMMENDATIONS
Drain interval : according to manufacturers’ recommendations and tune to your own use.
Do not mix with lubricants not ACEA C3 compliants.
PROPERTIES
Viscosity grade SAE J 300 5W-40
Density at 20°C (68°F) ASTM D1298 0,845
Viscosity at 40°C (104°F) ASTM D445 84.7 mm²/s
Viscosity at 100°C (212°F) ASTM D445 14.1 mm²/s
Viscosity HTHS at 150°C (302°F) ASTM D4741 3.64 mPa.s
Viscosity index ASTM D2270 172
Pour point ASTM D97 -39°C / -38°F
Flash point ASTM D92 234°C / 453°F
Sulfated ash ASTM D874 0.80% weight
TBN ASTM D2896 7.5 mg KOH/g
Click here to use Motul's application guide to find the recommended oil for your vehicle
This product was added to our catalog on Thursday 07 July, 2011.