Supertech P4-DU900-N2 Piston 90MM Bore 2.5MM Over 3.81in Stroke
(4) 90.00mm Bore; 2.5mm Over; 3.819" Stroke; 6.094" Rod; 1.063" (27.0mm) C/D; 42 Head CCs; 11.2:1 Compression Ratio; -2 Dome CCs; 296 Gram Weight; .827" (21mm) Pin Diameter; For Use with Naturally Aspirated/Nitrous; Forged Side Relief
Our pistons are manufactured from extruded high silicon, enhanced 4032 alloy (with additional Cu, Ni & Mg) that has low thermal expansion, excellent wear resistance and higher thermal conductivity. Our pistons with this alloy have withstood up to 42psi of turbo boost, with alcohol, without any problems.
A 2 or 3 forging steps process yields a fine structural grain oriented in fibers in the same direction of the stresses.
Several heat treatments provide the piston with a high tensile strength and evenly distributed hardness. The pistons are submitted to several machining steps in specially designed machines and in conventional CNC. machines with special diamond tools for dimensional precision, perpendicularity and flatness of the ring grooves. Contact reduction grooves are standard. Honed & reamed pin bores for precise fit.
Wrist pins are constructed of cold extruded chrome moly steel for high strength to be used with wire clip locks.
This product was added to our catalog on Tuesday 15 January, 2013.