The Davies, Craig EWP® Digital Controller now controls your Thermatic Fan too. No need for a separate thermal switch. The Controller varies the speed of your EWP® looking for, and locking onto your target temp. If the engine temp goes 3 degrees over the target, the Controller will turn on your radiator fan until the target temp is restored. The EWP® Digital Controller will also run the EWP® after ignition shutdown to reduce heat soak.
Specifications:
|
Input voltage |
12V DC to 15V DC |
|
Output voltage |
5V To 15V |
|
Maximum Current |
12A |
|
Operating temperatures |
-20° to 60°C (-5° to 140°F) |
|
Targeted (set) temperatures |
75°C,80°C,85°C,90°C and 95°C
(165°, 175°, 185°, 190° and 205°F) |
|
Fan cut-in temperature |
3°C (5.4°F) above the targeted (set) temperatures |
|
Controller type |
PCB with micro-processor |
|
Sensor type |
Thermister in housing |
|
Time-out |
2 minutes maximum or set -5°C (23°F) |
|
Indicator LEDs |
Temperature,power,EWP,test,fan |
|
Weight |
90 grams (3.2 oz) |
|
Dimensions |
101mm (I) x 95mm (w) 35mm x (d) |
Components:
-
Digital Controller 1
-
Instructions 1
-
Wiring harness 1
-
In-lince adaptor 1
-
Sleeve 3mm rubber adaptors 2
-
Hose clamp 2
-
Thermal sensor 1
-
Assorted hardware
This product was added to our catalog on Friday 27 January, 2012.