AEM 150 PSIg Brass Sensor Kit

AEM 150 PSIg Brass Sensor Kit

150 PSIg MAP Brass Sensor Kit. Brass Sensor Body. 1/8" NPT Male Thread.

Includes: 150 PSIg MAP Brass Sensor & 12" Flying Lead Connector.

AEM Sensor Flying Lead All AEM Sensors include a flying lead with a weather-tight seal and 12 inch insulated wires that are color coded in black, green and red! This is important since the correct connector will give you the most accurate voltage possible.

Sensor Performance Specifications:

Accuracy: +/- 3% Full Scale over -40C to 105C includes Repeatability, Hysteresis and Linearity
Operating Temp: -20C to 105C / -4F to 221F
Burst Pressure: 300PSI
Response Time: < 1mS
Wetted Materials: 304L & 316L Stainless Steel
Vibration: 100 to 2000Hz, 20g Sinusoidal, 3 Axes
Weight: <85g
Supply Current: <6mA at 5 Vdc
Output: .5 to 4.5Vdc Linear
Transfer Function: PSI = (37.5*(Voltage))-18.75
Elec. Termination: Integral weatherproof connector, includes mating connector with 12" leads, 1 Red (Supply Voltage 5Vdc +/- .5), 1 Black (Ground), 1 Green (Output)