This Davies Craig 8105 is the pump only!No other components are included Requires inlet and outlet adapters to connect hoses, adapters not included This replacement pump is suitable if you are replacing a pump that has already installed as part of a kit (like the Davies Craig 8005 or 8007)If you need a complete kit with installation components please purchase the Davies Craig 8005,or the 8007 which includes installation components and a digital controller.
The Davies Craig EWP80 Electric Water Pump (Part Number 8105) – is an electric water pump made from anti-corrosive, lightweight, glass-filled nylon & incorporates a carbon mechanical face seal for added reliability.
Technical Specifications:
Dimensions:
-
Height:- 87.5mm(3.31 inches)
-
Width:- 128mm(5.04 inches)
-
Pump weight:- 900 grams (2 lb)
-
Operating voltage:- 3V DC to 15V DC
-
Maximum current:- 7.5A
-
Flow rate (max):- 80 L/min (1270 US gal/hr) @ 13.5V DC
-
Operating temperature:- 40° to 130°C (-40° to 266°F)
-
Pump design:- Clockwise centrifugal
-
Motor life:-3,000 hours continuous at 80°C (176°F) and 12V DC; 6,000 hours with an EWP/Fan Digital Controller
-
Pump material:- Nylon 66, 30% glass-filled Burst pressure:-350kPa (50 psi) Seal:-Ceramic face sealRequires inlet and outlet adapters which are not included
The EWP is a recirculating pump which is ideal for a ‘closed system’ similar to an automotive cooling system; it is not ‘self-priming’.
This product was added to our catalog on Wednesday 12 February, 2014.