ACT ME2-HDG43 Heavy Duty Sprung 4 Pad Disc for Mitsubishi

ME2-HDG4 kit features ACT's most popular Heavy Duty pressure plate. ACT Heavy Duty pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center construction to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened Chrome-moly steel construction will provide years of service.

Features

• A low to moderate pedal feel; aggressive engagement with stock to low to moderate gear rattle. Monoloc provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications.
• Longer clutch life achieved through ACT's exclusive diaphragm design. Monoloc's hardened Chrome-moly steel construction will provide years of service.
• Premium ceramic friction materials provide low wear rates and high heat tolerance. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance.
• Recommended for high horsepower street or race use
• All ACT pressure plates are dynamically computer balanced for smooth operation at high RPM. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches.

Specifications

• Description: HD-M/Race Sprung 4 Pad
• Torque Capacity (ft/lbs.): 650
• Torque Increase Over O.E.: 80%
• SFI: N/A
• Disc Type: Race Disc
• Spline Count: 23
• Spline Size (in.): 1''
• Disc Diameter (in.): 9.4''
• Disc Diameter (mm.): 240
• Pressure Plate Type: Heavy Duty
• Product Weight (lbs.): 16.4
• Kit Contents: 4240508, AT03, MB018, RB601
• Warranty (Product Warranty): One (1) Year from Retail Purchase

Vehicle Fitment:

• MITSUBISHI LANCER EVOLUTION 2.0L/2000cc L4 TURBO DOHC (2003-2004)
• MITSUBISHI LANCER EVOLUTION 2.0L/1997cc (122ci) L4 TURBO DOHC (2005-2006)
• MITSUBISHI LANCER EVOLUTION MR 2.0L/1997cc (122ci) L4 TURBO DOHC (2005-2006)
• MITSUBISHI LANCER EVOLUTION RS 2.0L/1997cc (122ci) L4 TURBO DOHC (2005-2006)