Borg Warner EFR Series 9180 Turbocharger

Borg Warner EFR Series 9180 Turbocharger

EFR 9180 is the biggest, baddest, highest flowing turbo in the EFR family. Capable of a remarkable 94lb/min airflow and stable at very high boost levels, the 91mm OD compressor measures 67.7mm inducer and is a 7 blade FMW compressor. This turbo will redefine what 67mm turbos are capable of. After receiving requests from many high power enthusiasts and drag racers restrained to a 67mm inducer, there was a clear need for 1000hp capable turbos that still provide good spool and response. Using the high flowing 1.05 a/r Twinscroll T4 turbine housing is the most efficient way to run this as a single turbocharger. If twin turbos will be run, the .83 a/r or 1.05 a/r can be used, depending on manifolds and space constraints. Ideal for use as single turbo applications in the 700-1000hp per turbo range, or as very high power twin turbo applications >1000-1700+hp. Available with .83 a/r undivided T3 internal WG or 1.05 a/r divided twinscroll T4 housings (external WG). Ceramic Ball Bearing only, watercooling optional (recommended)

Compressor Specifications:

• Compressor Type: Forged-Milled Wheel (FMW) Extended Tip
• Compressor Wheel OD (exducer): 91 mm
• Compressor Wheel Inducer: 67.7 mm
• Max Flow Rate: 94 lb/min
• Built-in BOV: All EFR compressor housings incorporate an integrated BOV.
• Compressor Housing Connections:

          o Inlet: 4" Ported Shroud Hose Coupler
          o Outlet: 2.5" Hose Coupler w/ integrated Vband option

Turbine Specifications:

• Turbine Type: Low Inertia Gamma-Ti Turbine Wheel
• Turbine Wheel OD: 80 mm
• Stainless Steel Investment cast Housing

      The EFR 8374 is available in (2) different turbine housing configurations:
          o 0.83 A/R T3 undivided (Internal WG)
          o 1.05 A/R T4 twinscroll (external WG)

• Turbine outlet: GT-Vband (aka small 3" vband) ~92mm OD for all EFR turbos