8100 5W40 X-CLEAN C3 -505 01-502 00-505 00-LL04--Porsche 5 L

Price:   $47.88

Gasoline & Diesel lubricant for Euro IV engines
100% Synthetic
Lubricant specially designed for last generation cars, powered by turbo Diesel direct injection or gasoline engines, EURO IV emission regulation compliant, requiring an ACEA C3 engine oil, high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of suphated ash (= 0.8%),phosphorus (0.07 = x = 0.09%) and sulphur (= 0.3%). Suitable for any type of Diesel or gasoline engines calling for ACEA A3/B3 or A3/B4 lubricants.
ATTENTION : For BMW vehicles, this product can be used for gasoline engines only in EuropeanUnion countries, Switzerland, Norway and Liechtenstein. Refer to BMW recommendation. Do not use for engines from VW group fitted with DPF when VW 507 00 is required.
CAR RECOMMENDATIONS Nissan – Fiat – Kia/Hyundai – Suzuki – Ssangyong… Engines compliant with EURO IV emission regulation are fitted with sensitive exhaust gas aftertreatment systems :
- Sulphur and Phosphorus inhibit catalytic convertors operation and can damage catalyticcomponents : inefficient exhaust gas treatment.
- Sulfated Ashes clog diesel particulate filters : shorten regenerating cycle, higher fuel consumption and engine power loss.
ACEA developed ACEA C3 standard for lubricants with high HTHS (> 3.5 mPa.s), reduced SulphatedAsh, Phosphorus and Sulphur content (Mid SAPS), suitable for use with exhaust gas after treatment systems. ACEA C3 lubricants achieve extended drain intervals managed by vehicles computer on board.
Drain interval : according to manufacturers’ recommendations and tune to your own use.
Do not mix with lubricants not ACEA C3 compliants.
Viscosity grade SAE J 300 5W-40
Density at 20°C (68°F) ASTM D1298 0,845
Viscosity at 40°C (104°F) ASTM D445 84.7 mm²/s
Viscosity at 100°C (212°F) ASTM D445 14.1 mm²/s
Viscosity HTHS at 150°C (302°F) ASTM D4741 3.64 mPa.s
Viscosity index ASTM D2270 172
Pour point ASTM D97 -39°C / -38°F
Flash point ASTM D92 234°C / 453°F
Sulfated ash ASTM D874 0.80% weight
TBN ASTM D2896 7.5 mg KOH/g

Click here to use Motul's application guide to find the recommended oil for your vehicle

Purchase Options

Add to Cart:

  • Model: 102051
  • Shipping Weight: 10lbs
  • 5 Units in Stock
  • Manufactured by: Motul

This product was added to our catalog on Thursday 07 July, 2011.